<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=windows-1252">
<META content="MSHTML 6.00.2600.0" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial>I had this problem on the portside ear attachment to the
sliding fitting on the mast. Unfortunately, the "easier" alternative for you
(lashing the sail in place) is not "better." Having it repaired is
probably cheaper than replacing it--at least it was here. The problem
is galvanic intergranular corrosion in the aluminum--which gets its start
because of the stainless shackle. I would check all of the other parts
where stainless bolts run through the gooseneck as well. As long as the
corrosion has not gone so far as to make the repair impossible, you can continue
to use the part once repaired. You might want to look
at fitting nylon or teflon bushings. They would have to be
replaced occasionally, but can significantly reduce future galvanically caused
corrosion, which will continue as long as you have stainless in contact with
aluminum.</FONT></DIV>
<DIV><FONT face=Arial></FONT> </DIV>
<DIV><FONT face=Arial>Rob Alley</FONT></DIV>
<BLOCKQUOTE dir=ltr
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B>
<A title=peter.amos1@btinternet.com
href="mailto:peter.amos1@btinternet.com">Peter Amos</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A title=public-list@alberg30.org
href="mailto:public-list@alberg30.org">public-list@alberg30.org</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Sunday, August 18, 2002 3:49
AM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> [Alberg30] Gooseneck
problem</DIV>
<DIV><BR></DIV>
<DIV><FONT size=2>The attachment point for the mainsail clew on the gooseneck
has broken off,too many years where a stainless shackle was left in situ.The
obvious solution seems to be to remove the gooseneck, have the aluminum
casting built up by a welder,and redrilled.Does anyone know an easier
alternative?</FONT></DIV>
<DIV>Peter Amos</DIV>
<DIV>Tait Tait #478</DIV></BLOCKQUOTE></BODY></HTML>