<!doctype html public "-//W3C//DTD W3 HTML//EN">
<html><head><style type="text/css"><!--
blockquote, dl, ul, ol, li { padding-top: 0 ; padding-bottom: 0 }
--></style><title>Re: [Alberg30] sinks for a
refit</title></head><body>
<div>Further suggestion - I just replaced a round sink with a
rectangular one on my boat. The round one used to trap plates in it
about half way down and was a general pain to use effectively. Go with
a rectangular or square sink if you have a choice, it's much more
convenient.</div>
<div><br></div>
<div>Wally</div>
<div><br></div>
<blockquote type="cite" cite><font face="Arial" size="-1">For the sink
itself, measure the diameter and go to K-Mart. Get a shallow
round stainless steel bowl. You will have to drill three holes
for the bolts. Cheap and effective.</font></blockquote>
<blockquote type="cite" cite><font face="Arial" size="-1">Jim
Davis<br>
S/V Isa Lei<br>
CT 35</font></blockquote>
<div><br></div>
<div><br></div>
<x-sigsep><pre>--
</pre></x-sigsep>
<div><font color="#0000FF">The gods do not deduct from man's allotted
span the hours spent in sailing. Anon</font></div>
<div><font color="#0000FF"><u><b>www.georgianbaysailing.ca</b></u><b>
for interesting reading for sailors</b></font></div>
</body>
</html>