<P>Peter,
<P>I decided to convert the mainsheet on Revolution, A30 #526, from wire/rope to 3/8" line also. In my case, there was room for the 3/8" to pass over the sheave except at the end of the line where it was spliced & thicker. Because of my concern that this part of the line could become jammed when the sail was fully raised, I opted to have a local machine shop duplicate my existing aluminum sheave, but with 1/2" less diameter. It seems to run freely now, but the boat hasn't been in the water since being rerigged. The test of real use will come this Spring.
<P>Jay Davenport
<P> <B><I>Peter Amos <peter.amos1@btinternet.com></I></B> wrote:
<BLOCKQUOTE style="PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #1010ff 2px solid">
<META content="MSHTML 6.00.2719.2200" name=GENERATOR>
<STYLE></STYLE>

<DIV><FONT size=2>I see from the Maintenance site that the standard sheave can take a 3/8" halyard.Is there space in the housing above the sheave for this size line?If the space is tight could it be increased by careful use of a grinding stone on a Dremmel? Is 3/8" an O.K. size for a mainsail halyard?</FONT></DIV>
<DIV><FONT size=2>Peter Amos  #478</FONT></DIV></BLOCKQUOTE>