Yeah it is a nice system, gymnastics is right though,been learning a lot about that since I'm currently without the use of my left arm (kind of a pain when you live on a boat) but I managed to get the table down by laying on my back and supporting it with my knees and feet and releasing the barrel bolt with my good hand then lowering it down. It worked! Andy #477 -- "Meinhold, Michael J" wrote: That's the system I have - the forward end is a wooden L-bracket. It seems to be quite secure, though it take some gymnastics to get the table in and out. -----Original Message----- From: public-list-bounces@alberg30.org [mailto:public-list-bounces@alberg30.org]On Behalf Of Peter Staehling Sent: Wednesday, November 16, 2005 7:22 AM To: Alberg 30 Public List -- open to all Subject: [Public-list] Table Storage Whatever is supposed to hold the aft edge of my table when it is stored over the vberth is missing. According to the association web page the missing parts are a block of wood and a barrel bolt, which I assume must engage a hole in the table. Is that correct? If so, is it adequate? If not what alternate mounting is preferred? Pete Staehling #554 Aurora __________________________________ Yahoo! FareChase: Search multiple travel sites in one click. http://farechase.yahoo.com _______________________________________________ These businesses support your Association: http://www.alberg30.org/store/A30supporters.html Please support them. _______________________________________________ Public-list mailing list Public-list@alberg30.org http://alberg30.org/mailman/listinfo/public-list _______________________________________________ These businesses support your Association: http://www.alberg30.org/store/A30supporters.html Please support them. _______________________________________________ Public-list mailing list Public-list@alberg30.org http://alberg30.org/mailman/listinfo/public-list 1132157680.0