[Public-List] Cape horn windvane problem solved

[brooks.glenn at comcast.net]

Hi Stephen, Yes, I did send him an email earlier today. Think I will followup with a recommendation to him to publish schematics for control line installation. There are four possible control line methods described in the installation manual, but only one drawing. So i got it wrong when I installed the turning blocks for the rigging the first time. The Cap Horn is definitely an improvement to the boat. I missed the single handed Transpac start in California because of no winds for days on end around Cape Flattery, and couldnt get there in time to make the start, but am excited about prospects for going offshore with this gear. It is every bit as good as the accolades on Yves site. 


Glenn 
Dolce 318 

----- Original Message -----
From: "Stephen Gwyn" <stephen.gwyn at nrc-cnrc.gc.ca> 
To: public-list at lists.alberg30.org 
Sent: Monday, July 9, 2012 1:05:17 PM 
Subject: Re: [Public-List] Cape horn windvane problem solved 

Cool! You should tell Yves, so he tells the next guy 
with who calls him with the same problem. 

SG 

-- 
------------------------------------------------------------------------ 
Stephen Gwyn | Tel: 1-250-363-3136 
Canadian Astronomical Data Centre | Fax: 1-250-363-0045 
Herzberg Institute of Astrophysics | Cell: 1-250-885-6969 
5071 West Saanich Road | E-mail: Stephen.Gwyn at nrc-cnrc.gc.ca 
Victoria, BC, V9E 2E7, Canada | http://astrowww.phys.uvic.ca/~gwyn/ 
------------------------------------------------------------------------ 

_______________________________________________ 
These businesses support your Association: 
http://www.alberg30.org/store/A30supporters.html 
Please support them. 
_______________________________________________ 
Public-List mailing list 
Public-List at lists.alberg30.org 
http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org 

 1341884193.0