[alberg30] Re: Dogleg table support

[Guy Lalonde]

From: "Guy Lalonde" <guy.lalonde at sympatico.ca>

Lee,
mine is set up like yours but the vertical portion of the dogleg
that fits into the sleeve has a pin sticking out on one side.
The sleeve mounted on the outboard side of the bunk face has
two notches. Then when you insert the dogleg into the sleeve,
you line up the pin with one of the two notches in the sleeve.
One position will place the table over the cabin sole and the
other position will place the table over the starboard bunk.
Works very well.

Guy        Cyrena #466
guy.lalonde at sympatico.ca

-----Original Message-----
From: FINNUS505 at aol.com <FINNUS505 at aol.com>
To: alberg30 at onelist.com <alberg30 at onelist.com>
Date: Saturday, December 05, 1998 10:32 AM
Subject: [alberg30] Re: Dogleg table support


>From: FINNUS505 at aol.com
>
>Hi Gordon,
>No this dogleg looks really weird. a tinsmiths final project at school!
>
>Picture a 4 inch diam aluminum pipe.  Now, 1/3way up its lenght, it takes a
90
>deg. turn. All welded. 2/3 up its lenght, its takes another 90 deg turn to
the
>first weld, ending up going in the same direction as the bottom third!
>
>The bottom vertical component slips into a sleeve secured on the 'outboard'
>face of the stbd bunk. the upper vertical part fits into a sleeve on the
>bottom of the table.
>
>Why bother?  Because that middle section, the dog leg, allows the table to
sit
>further 'inboard', giving more room to people sitting in the stbd bunk. The
>whole thing swings onthe vertical axis, too, giving you a wide range of
table
>locations.
>
>My boat came with the table and the dogleg, but the sleeve or receptacle
that
>is fastned to the 'outboard' side of the bunk face must have gone over the
>side with the bunk when the former owner remodeled. Or, started to remodel.
>
>Take care,
>Lee Trachtenbeg
>Stargazer #255
>
>
>
>
>------------------------------------------------------------------------
>To unsubscribe from this mailing list, or to change your subscription
>to digest, go to the ONElist web site, at http://www.onelist.com and
>select the User Center link from the menu bar on the left.


------------------------------------------------------------------------
To unsubscribe from this mailing list, or to change your subscription
to digest, go to the ONElist web site, at http://www.onelist.com and
select the User Center link from the menu bar on the left.

 912914441.0