[alberg30] Re: Main Halyard Sheave Replacement

[FINNUS505 at aol.com]

From: FINNUS505 at aol.com

Hi DLS,

When you dissasemble your main halyard sheave, what you will find, if your
boat is the same as mine, is  that the original sheave is made of that '60's
composite material of resin and cloth. There is no seperate bearing or
bushing; the hole for the compression tube shaft, in the sheave, is the
bearing. The new sheave that Joe made works the same way.

Good luck,

Lee Trachtenberg
Stargazer, #255, 1967

------------------------------------------------------------------------
Help support ONElist, while generating interest in your product or
service. ONElist has a variety of advertising packages. Visit
http://www.onelist.com/advert.html for more information.

 905482946.0