[alberg30] Re: Vented loop for head water inlet?

[David Swanson]

From: David Swanson <zira at mindspring.com>

Tom -

Raritan's site has on-line instruction manuals.  These detail what you need to
do on inlet & outlet sides.  You need Adobe Acrobat reader (available on there
web site).  Address is

http://www.raritaneng.com/main/main.html

Good Luck.

dls

"Forhan, Thomas" wrote:

> From: "Forhan, Thomas" <Thomas.Forhan at mail.house.gov>
>
>         When I bought Calliope the head was installed with the inlet line
> running a foot of so directly from the thru-hull to the head. Should it not
> have a vented loop up above the waterline?
>
>         If so, I'd like to keep it all nice and neat and install the loop
> inside the cabinet area behind the head, up and down on the aft bulkhead,
> just under the deck. However, when heeled to port to the rail,  that will be
> pretty close to the dynamic waterline. - should I forgo the aesthetics and
> install the vent out in  the open, or can I conceal it.
>
>         Thanks
>
>         Tom F.
>
> ------------------------------------------------------------------------
> Did you know that knowledge is power?
> http://www.ONElist.com
> Join a new ONElist e-mail community and strengthen your mind!


------------------------------------------------------------------------
Tired of empty chat rooms and out of date bulletin boards?
http://www.ONElist.com 
ONElist: Making the Internet Intimate

 925257771.0