[alberg30] keel rust - expansion - split glass

Charles Haggart chaggart at sympatico.ca
Thu Aug 26 07:07:19 PDT 1999


From: "Charles Haggart" <chaggart at sympatico.ca>

I have a similar problem on my Alberg 30 # 150, the fibre glass on top of
the iron keel had split and the rusting iron had expanded and pushed up the
glass. I found that it was only the top surface of the keel that was
affected after I cut away all the glass that was loose. I plan to
re-fibreglass the top of the keel and that should solve the problem.

-----Original Message-----
From: middleco at avalon.net [mailto:middleco at avalon.net]
Sent: August 25, 1999 11:44 PM
To: alberg30 at onelist.com
Subject: [alberg30] keel rust - expansion - split glass


From: middleco at avalon.net

found an area in the bottom of the boat where the keel rusted and split the
glass, from expansion. About sixteen inches long by eight inches wide.
Located forwardmost under the saloon, just aft of the door to head/hanging
locker.

Comments, advice.

My thoughts, if water is migrating into the keel from below the waterline,
the boat could sink. Or, water seeping in could aggravate the rusting, and
expansion of the keel, slitting the keel glass open.

--------------------------- ONElist Sponsor ----------------------------

ONElist:  your connection to people who share your interests.

------------------------------------------------------------------------


--------------------------- ONElist Sponsor ----------------------------

ONElist now has T-SHIRTS!
For details and to order, go to:
<a href=" http://clickme.onelist.com/ad/tshirt1 ">Click Here</a>

------------------------------------------------------------------------

 935676439.0


More information about the Public-List mailing list