[alberg30] motor mounts

[Joseph Fleming]

From: Joseph Fleming <joseph-fleming at usa.net>

Thank you for the information about the motor mounts
Joe Fleming

-----Original Message-----
From:	Chester & Jan Koop 
Sent:	Monday, August 30, 1999 7:49 PM
To:	alberg30 at onelist.com
Subject:	Re: [alberg30] motor mounts

From: "Chester & Jan Koop" <cjk at tir.com>

Joe,
I do not have genuine motor mounts per sa on my 1970 Alberg and there is
very little vibration.  My Atomic 4 is bolted to a piece of flat iron on the
forward end which in turn is bolted directly to the fiberglass attachments
point molded into the hull liner on either side.  Between the flat iron and
the hull liner is a 3/16" to 3/8" thick piece of hard rubber which acts, I
suppose, as sort of a cushion/shock absorber.  The aft end of the engine is
similarly attached, absent the flat iron.

Chet Koop
Tangaroa


--------------------------- ONElist Sponsor ----------------------------

ONElist:  the best place to EXPLORE topics, SHARE ideas, and 
CONNECT to people with the same interests.

------------------------------------------------------------------------


--------------------------- ONElist Sponsor ----------------------------

Your anytime, anywhere sports store. Fogdog Sports.
<a href=" http://clickme.onelist.com/ad/fogdog2 ">Click Here</a>

------------------------------------------------------------------------

 934253608.0