[alberg30] Re: More access panel info

[Guy Lalonde]

From: "Guy Lalonde" <guy.lalonde at sympatico.ca>

Hi Paul,

your proposed wheel steering arrangement at a right angle into the
companionway bulkhead sounds very unconventional and would
probably require a lot of custom work. And because of that I think
it could affect ( negatively ) the resale value of your boat.

Not that I doubt your technical prowess, far from it, but if I were a buyer
and it came down to a choice between your A30 with such a custom
setup and another A30 ...

Cheers,
Guy    Cyrena #466
guy.lalonde at sympatico.ca

-----Original Message-----
From: RABBIT649 at aol.com <RABBIT649 at aol.com>
To: alberg30 at onelist.com <alberg30 at onelist.com>
Date: Wednesday, February 24, 1999 6:19 PM
Subject: [alberg30] Re: More access panel info


>From: RABBIT649 at aol.com
>
>Dear Gordon,
> Sounds like it might be adequate, but it dosn't help me much because the
guy
>(previous owner) that installed mine cut a ragged 12 x 18 hole just in
front
>of the tiller post and then screwed a piece of sheet aluminum over the hole
>with pan head screws. i have to put a hatch there, but may need another
>forward in the sole for engine access.
> What so you think of my idea for remounting the pedestal as a right angle
>through the forward bulkhead of the cockpit?
>Regards,
> Paul
>Ashwagh #23
>
>------------------------------------------------------------------------
>Have you seen our new web site? http://www.onelist.com
>


------------------------------------------------------------------------
Ideas on how we can improve ONElist?
http://www.onelist.com
Check out the Suggestion Box feature on our new web site

 919944790.0