[alberg30] Re: Please, please, please (Biowsprit/roller)

[stephen sousa]

From: "stephen sousa" <stephen=sousa%eng%emchop1 at fishbowl02.lss.emc.com>

Jim/Tom,

I searched through the 1973 Maintanence Manual and couldn't locate the 
piece on the Bowsprint/roller. Jim, if you have a copy of this section pls 
forward to Tom.

Thanks,
Stephen
-------------
Original Text
From: <A30240 at aol.com>, on 1/25/99 10:34 PM:
From: A30240 at aol.com

Tom

Since someone else is sending you a copy of the roller, let me suggest 
making
the prongs on the forward end about a 1 1/2" longer, since you are using a
CQR.  Also you might want to put a chock on the top about 3" back from the
roller.  This distance should be as far forward as possible and still leave
the anchor free.  I use a Delta and the shank lays in the chock.  These
modifications: 1. better stability for the plow   2. Keeps the rode running
over the bowsprit.

Jim Davis
Isa Lei
240

------------------------------------------------------------------------
To unsubscribe from this mailing list, or to change your subscription
to digest, go to the ONElist web site, at http://www.onelist.com and
select the User Center link from the menu bar on the left.


------------------------------------------------------------------------
To unsubscribe from this mailing list, or to change your subscription
to digest, go to the ONElist web site, at http://www.onelist.com and
select the User Center link from the menu bar on the left.

 917355061.0