[alberg30] Re: spreaders

[Ken Butler]

From: Ken Butler <kbutler at isn.net>

At 02:12 PM 1/16/99 -0400, you wrote:
>From: Tom Sutherland <tomsu at uky.campuscw.net>
>
>    Ken............What is it exactly you are going to do with these
>measurements ? I do not remember seeing your original post. I have my rig
>beside my house and the spreaders are in my shop to be refinished.
>
>    The length of mine are 36 & 3/4 inches and they are dimpled in  about 3/4
>of an inch on the end where the shrouds rest. Also on # 412 the base of the
>spreader looks like it sets away from the mast by about  1/2" or so. I would
>guess that this  mounting arrangement has changed over the years so if you
are
>looking for an exact distance from the "extrusion" of the mast to the
point of
>attachment of the shroud I could bolt the spreader back on the mast and
>measure again.
>
>    Also if you need the measurement of any of the shrouds either aft,
side or
>shortys please let me know and I will uncoil mine and measure them for you
>..... My fore stay runs through a roller furling and I can also try to get an
>accurate account of that also.
>
>Tom S
>a/berg 30   #412
>InCahoots
>Tom I had lost my mast and the rest of the gear and I am in process of
rebuilding from scratch,the the original parts are not available.I received
the measurements from George ,thanks for the interest.Ken
>
>Ken Butler wrote:
>
>> From: Ken Butler <kbutler at isn.net>
>>
>>   I stilll have not received information about the length of stays and
>> shrouds for the Alberg 30.I know unless someone has these recorded some
>> place it would be a pain to take these measuremnts but ,perhaps someone has
>> a spreader at hand and could tell me the length ?The nearest Alberg is
>> about hundred miles from here so it would be a lot easier to get this
>> information by EM.
>>                                              Thanks
>>                                                    Ken Butler
>>
>> ------------------------------------------------------------------------
>> To unsubscribe from this mailing list, or to change your subscription
>> to digest, go to the ONElist web site, at http://www.onelist.com and
>> select the User Center link from the menu bar on the left.
>
>
>
>
>------------------------------------------------------------------------
>To unsubscribe from this mailing list, or to change your subscription
>to digest, go to the ONElist web site, at http://www.onelist.com and
>select the User Center link from the menu bar on the left.
>
>


------------------------------------------------------------------------
To unsubscribe from this mailing list, or to change your subscription
to digest, go to the ONElist web site, at http://www.onelist.com and
select the User Center link from the menu bar on the left.

 916546436.0