[alberg30] Re: atomic 4 low rpms & sail #s

[Shawn Orr]

From: "Shawn Orr" <Shawnwilliam at msn.com>

My sail number is the same as the hull number.

Shawn Orr
Il Molino
#307
----- Original Message -----
From: APSTEC.COM (A. Bagchi) <abagchi at apstec.com>
To: <alberg30 at onelist.com>
Sent: Friday, July 23, 1999 10:14 AM
Subject: [alberg30] Re: atomic 4 low rpms & sail #s


> From: abagchi at apstec.com (APSTEC.COM (A. Bagchi))
>
> 1) Bill
>
>  I seem to be having the same problem with mine on shamrock in neutral it
> revs fine I get about
> 1500 rpm in gear with a 3 blade 12x6 prop. In the past I could get at
least
> 2500rpm out of it. My distributor was pretty messed up and I rebuilt it
but
> wasn't able to find new springs for the mechanical advance  before, I just
> ordered a set of springs from the old lyme marina which I am hoping will
> cure the problem. Once I get them installed  I will post another message .
> in the meantime let me know if you find some other solution
>
> 2) Sail #
>
> when I bought shamrock the sails that came with it were numbered KC58 but
> my hull
>             is #180. I need to put numbers on a secondhand set of sails I
> bought and the sailmaker tells
> me the number should match the hull # ???????? and KC replaced with CAN.
> Anybody have any ideas on what it should be
>
>
>
>
> --------------------------- ONElist Sponsor ----------------------------
>
> ONElist:  your connection to online communities.
>
> ------------------------------------------------------------------------
>



--------------------------- ONElist Sponsor ----------------------------

Enter ONElist’s WEEKLY DRAWING for $100!
http://www.onelist.com
By joining the FRIENDS & FAMILY PROGRAM.  See homepage for details.

------------------------------------------------------------------------

 932741134.0