[alberg30] Remove step plate

[Tom Sutherland]

From: Tom Sutherland <sutherlandt at prodigy.net>

Jim ...I agree with what you are saying. Thanks for your endorsement of the
"Heli-coil"

Tom S
A30  #412

A30240 at aol.com wrote:

> From: A30240 at aol.com
>
> Having used helicoils on engines, I like them.  By the time I replaced my AT4
> it had four or five put in.  One thought about using them on the mast step
> would be to use never-sieze on the machine screws.  The helicoil itself is
> larger in diameter than the hole that the machine screw goes through.  If it
> ever locks up, and you end up "verbally abusing" the helicoil, screws, mast
> step, et al with children around ........
>
> Jim Davis
> Isa Lei
> 240
>
> 

--------------------------- ONElist Sponsor ----------------------------

       ~ FREE Games & CA$H Prizes!  ~  $55,000+ Awarded Monthly ~ 
Welcome to Gamesville.com-- Home of the World's Biggest & Best Free Games
  Play Three-Eyed Bingo, Quick-Draw Poker, Pop Quiz & Picturama  FREE! 
   <a href=" http://clickme.onelist.com/ad/gamesville5 ">Click Here</a>

------------------------------------------------------------------------

 943499422.0