[alberg30] Dreaming of sinking!

Shawn Orr Shawnwilliam at msn.com
Mon Oct 4 07:30:17 PDT 1999


From: "Shawn Orr" <Shawnwilliam at msn.com>

Attach the bildge to a piece of wood board and lower it in.  Thats what I
did, and it works great.  Make sure to buy a manual switch along with the
float switch.
Shawn Orr
IL Molino
#307
----- Original Message -----
From: Forhan, Thomas <Thomas.Forhan at mail.house.gov>
To: <alberg30 at onelist.com>
Sent: Monday, October 04, 1999 9:59 AM
Subject: [alberg30] Dreaming of sinking!


> From: "Forhan, Thomas" <Thomas.Forhan at mail.house.gov>
>
>
> I woke up early Saturday morning with a start - I had been dreaming of
> Calliope sinking at the docks, unattended.
>
> I got down to the docks all was well, of course.
>
> Still , so she has two manual bilge pumps, but I think I'd like to add an
> electrical one, one of the Rule types.
>
> Looking into the depths of the bilge under the engine, I see the spot to
> mount one, way, way down there. But what am I looking at?  Specifically,
is
> the bottom of the bilge fiberglass, so that I could put a few self-tapping
> screws into to mount the pump base; is it a thin layer over cast iron that
> will thwart my attempts to attach something firmly into it?
>
> Thanks
>
> Tom F.
> Calliope #287
>
> >

--------------------------- ONElist Sponsor ----------------------------

Get EXPERT CONTENT at ONElist!
Join PROS&PUNDITS.  For details go to: 
<a href=" http://clickme.onelist.com/ad/prospun1 ">Click Here</a> 

------------------------------------------------------------------------

 939047417.0


More information about the Public-List mailing list