[alberg30] Jib halyard replacement

[Rap1208 at aol.com]

From: Rap1208 at aol.com

Andy, while you are in the chair, what are you useing to pull yourself up.   
That is best done with the mast down.  Take out the shiv, lube it and make 
sure it turns freely, have it  machined for a 3/8 lene, a nice big groove, 
and re install,  You have to take off a plate, little screws, remove the 
pin.......  hard to not drop some thing working over your head.  Replace with 
good quality,  like Stay set X, or something  Do the same with the jib 
halyard if you haven't already.  There you will need to replace the old tired 
block with a good, bigger one.   Russ

--------------------------- ONElist Sponsor ----------------------------

eGroups' Valentine's Day Gift Guide - Shop Here Now:
<a href=" http://clickme.onelist.com/ad/SparksValentine4 ">Click Here</a>

------------------------------------------------------------------------


 949989702.0