[alberg30] Prop & shaft question
Douglas Wight
doug at recorder.ca
Wed Feb 2 12:14:35 PST 2000
From: "Douglas Wight" <doug at recorder.ca>
Bob: There is no problem at all,when you swing the rudder off to 90 degrees
you can pull the prop straight off, and install your new one or whatever.
Regards, Doug Wight,
----- Original Message -----
From: Bob Lincoln <lincoln at cc.UManitoba.CA>
To: <alberg30 at onelist.com>
Sent: 2-Feb-00 10:18 AM
Subject: [alberg30] Prop & shaft question
> From: "Bob Lincoln" <lincoln at cc.UManitoba.CA>
>
> Is it necessary to remove the rudder in order to remove the
> prop, or is there enough clearance as is? I have room
> enough to drop it. Any comments appreciated before I leap
> in.
> Bob Lincoln
> Indigo #590
>
>
> --------------------------- ONElist Sponsor ----------------------------
>
> GET A NEXTCARD VISA, in 30 seconds. Get rates as low as 0.0 percent
> Intro APR and no hidden fees. Apply NOW.
> <a href=" http://clickme.onelist.com/ad/NextcardCreative7SR ">Click
Here</a>
>
> ------------------------------------------------------------------------
>
>
--------------------------- ONElist Sponsor ----------------------------
GET A NEXTCARD VISA, in 30 seconds. Get rates as low as 0.0 percent
Intro APR and no hidden fees. Apply NOW.
<a href=" http://clickme.onelist.com/ad/NextcardCreative7SR ">Click Here</a>
------------------------------------------------------------------------
949522475.0
More information about the Public-List
mailing list