[alberg30] Prop & shaft question

[John Brugeman]

From: "John Brugeman" <johnbrugeman at ameritech.net>

Bob,
We removed our prop and shaft last year to replace the bearing. Just turn
you rudder hard to port or starboard and there is room.  No need to remove
the rudder.
Capt. John
Mermaid
-----Original Message-----
From: Bob Lincoln <lincoln at cc.UManitoba.CA>
To: alberg30 at onelist.com <alberg30 at onelist.com>
Date: Wednesday, February 02, 2000 10:19 AM
Subject: [alberg30] Prop & shaft question


>From: "Bob Lincoln" <lincoln at cc.UManitoba.CA>
>
>Is it necessary to remove the rudder in order to remove the
>prop, or is there enough clearance as is?  I have room
>enough to drop it.  Any comments appreciated before I leap
>in.
>Bob Lincoln
>Indigo #590
>
>
>--------------------------- ONElist Sponsor ----------------------------
>
>GET A NEXTCARD VISA, in 30 seconds.  Get rates as low as 0.0 percent
>Intro APR and no hidden fees.  Apply NOW.
><a href=" http://clickme.onelist.com/ad/NextcardCreative7SR ">Click
Here</a>
>
>------------------------------------------------------------------------
>
>


--------------------------- ONElist Sponsor ----------------------------

GET A NEXTCARD VISA, in 30 seconds.  Get rates as low as 0.0 percent 
Intro APR and no hidden fees.  Apply NOW.
<a href=" http://clickme.onelist.com/ad/NextcardCreative7SR ">Click Here</a>

------------------------------------------------------------------------


 949621036.0