[alberg30] Andante sails!

Alan P. Kefauver apk2 at home.com
Wed Jun 7 20:28:04 PDT 2000


BoatUS is trying to source from Sherwood for me. Ditto.

I'll get some O rings,
Thanks,

I now have an extra GM25 manual if anyone needs one.

Alan
Andante#152

*********** REPLY SEPARATOR  ***********

On 6/7/2000 at 11:11 PM Charles Haggart wrote:

>Alan;
>
>Two things.
>
>1
>The water up the rudder shaft. I had the same problem, apparently it is
>common in the older boats, Under power at hull speed there was a fountain
>pouring into the cockpit. I popped the plate off the mount where the shaft
>come through into the cockpit and I placed TWO O rings over the shaft. I
>worked them down below the mount. I put the plate back on and it stopped 98%
>of the water. It was originally as a stop gap but I haven't touched it
>since. The O ring material was quite light as there is little play between
>the shaft and the rudder tube.
>
>2
>I too have a Sherwood Brass Pump. They must have been installing them that
>week. I am currently trying to source parts from a engine guy in Kingston
>On. and if I have any luck I'll let you know.
>
>Glad to here that the Engine is working fine... mine is too.
>
>Charles Haggart # 150
>
>
>------------------------------------------------------------------------
>Go to Expedia.com to win airfare to Vegas for you and 20 friends, 
>$15,000 and a suite at Bellagio for New Year's. Or win 2 roundtrip
>tickets anywhere in the U.S. given away daily. Click here for a chance win.
>http://click.egroups.com/1/5295/8/_/476031/_/960433931/
>------------------------------------------------------------------------




------------------------------------------------------------------------
Old school buds here:
http://click.egroups.com/1/4057/8/_/476031/_/960435022/
------------------------------------------------------------------------


 960434884.0


More information about the Public-List mailing list