[alberg30] Mast Issues

[Alan P. Kefauver]

Ah yes, pushed -up- the mast, not down. Thanks
Alan
*********** REPLY SEPARATOR  ***********

On 5/1/2000 at 2:10 PM Mpete53 at aol.com wrote:

>If you don't want to pull the mast, try an "electrician fish tape."  
>Electricians use them for snaking though walls as well as pulling wires 
>though conduit.
>
>Cut a short piece of the end of the tape and bend a tight hook in it. This 
>piece will be used by the person at the top of the mast to catch the tape 
>pushed up the mast.
>
>Bend a tight hook in one end of the tape and push it up though mast.
>
>The person at the top should be able to hook the tape that was pushed up the 
>mast. If the end were bent correctly the two hooked ends should connect 
>allowing the long tape to be pulled out the top hole. 
>
>Once you have the end out you can either marry the new wires to the tape or a 
>tag line and pull them thought the mast.
>
>Happy Fishing
>
>Mark
>



------------------------------------------------------------------------
You have a voice mail message waiting for you at iHello.com:
http://click.egroups.com/1/3555/8/_/476031/_/957661779/
------------------------------------------------------------------------


 957661720.0