[alberg30] Mast Issues

[Shawn Orr]

I agree.  Did it last week, in 30 minutes. I had the stick down though, made
it very easy.
Shawn Orr
IL MOLINO
#307

----- Original Message -----
From: <Mpete53 at aol.com>
To: <alberg30 at egroups.com>
Sent: Monday, May 01, 2000 2:10 PM
Subject: Re: [alberg30] Mast Issues


> If you don't want to pull the mast, try an "electrician fish tape."
> Electricians use them for snaking though walls as well as pulling wires
> though conduit.
>
> Cut a short piece of the end of the tape and bend a tight hook in it. This
> piece will be used by the person at the top of the mast to catch the tape
> pushed up the mast.
>
> Bend a tight hook in one end of the tape and push it up though mast.
>
> The person at the top should be able to hook the tape that was pushed up
the
> mast. If the end were bent correctly the two hooked ends should connect
> allowing the long tape to be pulled out the top hole.
>
> Once you have the end out you can either marry the new wires to the tape
or a
> tag line and pull them thought the mast.
>
> Happy Fishing
>
> Mark
>
> ------------------------------------------------------------------------
> Bids starting at $7 for thousands of products - uBid.com
> http://click.egroups.com/1/3027/5/_/476031/_/957204669/
> ------------------------------------------------------------------------
>
>
>



------------------------------------------------------------------------
Now the best and coolest websites come right to you based on your 
unique interests. eTour.com is surfing without searching. 
And, it's FREE!
http://click.egroups.com/1/3013/5/_/476031/_/957204984/
------------------------------------------------------------------------


 957205167.0