[Alberg30] Resins

[Mpete53 at aol.com]

  +-------------------------------------------------------------------+
  | Wow! Save big bucks through October 31 at Sailnet's online store. |
  | Go to http://www.myaffiliateprogram.com/u/sailnet/t.asp?id=1066   |
  | and use the e-coupon code APMK18                                  |   
  +-------------------------------------------------------------------+

In a message dated 10/1/00 6:08:58 PM Pacific Daylight Time, cjk at tir.com 
writes:

<< Chester >>
 I converted the forward compartment under the cabin sole into a holding tank 
about 3 years ago. My forward compartment has an extra lip on it. that is to 
say there is a place for the floorboard to set and a second flat about 1 inch 
wide and 1/2 below where the floorboard lip. This extra lip allowed me to 
convert it into a tank by building an odd shaped fiberglass top. I made the 
top using polyester resin and mat, coated all surfaces exposed to the 
continence of the tank with West epoxy and glued the top on with 3M 5200. 

I tend to get a little carried away with some of these projects and this is 
not for everybody but, it seems to be working fine.

I have some photos that I can email to you if you like.

Cutting out the liner and fitting a molded tank in would work nicely of you 
could get a few people interested in the project.

Mark
_______________________________________________
 Public-list mailing list -- Public-list at alberg30.org
 http://www.alberg30.org/mailman/listinfo/public-list
 To unsubscribe: email to Public-list-request at alberg30.org
 Include command "unsubscribe <password>" in subject or body.
 Use command "help" for more options.

 970517867.0