[Alberg30] Resins

[Tom Sutherland]

  +-------------------------------------------------------------------+
  | Wow! Save big bucks through October 31 at Sailnet's online store. |
  | Go to http://www.myaffiliateprogram.com/u/sailnet/t.asp?id=1066   |
  | and use the e-coupon code APMK18                                  |   
  +-------------------------------------------------------------------+

George,
    As usual you raise very good points.  I did think about the rough interior, but
thought it might be remedied by sloshing several coatings of epoxy around the
interior after emptying the styrofoam. Did wonder about adhesion however since I
would not be able to remove any blush from the interior.
    Any merit in discussing a "group purchase" for these holding tanks ?  I realize
that the group purchase idea has not always been successful but if enough people
would be interested in a custom fit holding tank it might be worth looking into.

Tom S

George Dinwiddie wrote:

> Tom,
>
> I don't know if uncured epoxy will dissolve the styrofoam, or not.
> You would certainly end up with a very rough surface on the interior
> of your tank, and this would prevent it from ever being completely
> cleaned out.  Worse, I don't think that the epoxy laminate will be
> impervious to odors.  I wouldn't recommend a glass laminate, even
> using epoxy resin, for a holding tank.  I, personally, wouldn't use
> anything but HD polyethylene.
>
>  - George
>



_______________________________________________
 Public-list mailing list -- Public-list at alberg30.org
 http://www.alberg30.org/mailman/listinfo/public-list
 To unsubscribe: email to Public-list-request at alberg30.org
 Include command "unsubscribe <password>" in subject or body.
 Use command "help" for more options.

 970240217.0