[Alberg30] Resins

[John Bailey]

  +-------------------------------------------------------------------+
  | Wow! Save big bucks through October 31 at Sailnet's online store. |
  | Go to http://www.myaffiliateprogram.com/u/sailnet/t.asp?id=1066   |
  | and use the e-coupon code APMK18                                  |   
  +-------------------------------------------------------------------+

I, for one would be very interested in a group buy of a custum holding tank.

John Bailey
"Zevulun"  #33

----- Original Message -----
From: Tom Sutherland <sutherlandt at prodigy.net>
To: <public-list at alberg30.org>
Sent: Friday, September 29, 2000 11:10 AM
Subject: Re: [Alberg30] Resins


>   +-------------------------------------------------------------------+
>   | Wow! Save big bucks through October 31 at Sailnet's online store. |
>   | Go to http://www.myaffiliateprogram.com/u/sailnet/t.asp?id=1066   |
>   | and use the e-coupon code APMK18                                  |
>   +-------------------------------------------------------------------+
>
> George,
>     As usual you raise very good points.  I did think about the rough
interior, but
> thought it might be remedied by sloshing several coatings of epoxy around
the
> interior after emptying the styrofoam. Did wonder about adhesion however
since I
> would not be able to remove any blush from the interior.
>     Any merit in discussing a "group purchase" for these holding tanks ?
I realize
> that the group purchase idea has not always been successful but if enough
people
> would be interested in a custom fit holding tank it might be worth looking
into.
>
> Tom S
>
> George Dinwiddie wrote:
>
> > Tom,
> >
> > I don't know if uncured epoxy will dissolve the styrofoam, or not.
> > You would certainly end up with a very rough surface on the interior
> > of your tank, and this would prevent it from ever being completely
> > cleaned out.  Worse, I don't think that the epoxy laminate will be
> > impervious to odors.  I wouldn't recommend a glass laminate, even
> > using epoxy resin, for a holding tank.  I, personally, wouldn't use
> > anything but HD polyethylene.
> >
> >  - George
> >
>
>
>
> _______________________________________________
>  Public-list mailing list -- Public-list at alberg30.org
>  http://www.alberg30.org/mailman/listinfo/public-list
>  To unsubscribe: email to Public-list-request at alberg30.org
>  Include command "unsubscribe <password>" in subject or body.
>  Use command "help" for more options.
>

_______________________________________________
 Public-list mailing list -- Public-list at alberg30.org
 http://www.alberg30.org/mailman/listinfo/public-list
 To unsubscribe: email to Public-list-request at alberg30.org
 Include command "unsubscribe <password>" in subject or body.
 Use command "help" for more options.

 970280303.0