[Alberg30] Front hatch lost
Hugh Freebairn
hughfree at hotmail.com
Wed Apr 4 22:20:36 PDT 2001
Fritz,
If you're going to use some clear plastic for your hatch don't use acrylic!
Use Lexan or coated Polycarbonate (the same thing). It is much much
stronger. I challenge you to take a piece of say 1/4 inch acrylic and a
piece of 1/4 inch polycarbonate of the same dimensions and hit each as hard
as you can with a hammer. I have done this and I will never go to sea with
a piece of acrylic on any hatch or port light again.
Hugh Freebairn
"Aliage"
>From: Robert Kirk <isobar at mail.cablespeed.com>
>Reply-To: public-list at alberg30.org
>To: public-list at alberg30.org
>Subject: Re: [Alberg30] Front hatch lost
>Date: Wed, 04 Apr 2001 11:45:39 -0400
>
>Fritz... By coincidence, I have my front hatch disassembled and sitting on
>my workbench now. Getting ready to make a new frame from 5/4 teak (The
>center is merely a piece of frosted 19/32 acrylic or similar tough
>plastic). You're more than welcome to take a look at it, or I can give you
>the dimensions of the 4 frame pieces & center as soon as I take them, or
>you can have them as a template when I'm done - before the Fall rendezvous,
>I hope :-)
>
>Bob Kirk
>Isobar #181
>
>
>>I definately agree. I don't need someone's current hatch. But it sounds
>>like lots of people have used their old hatches to make new ones. I'm
>>hoping someone kept their old hatch and could lend it as another template.
>>However, from some of the respones people have left me, they've pitched
>>their old ones. :( I'm sure I'll be able to make one from scratch, but
>>it's always better to see what it should look like. :)
>>-Fritz
>
>
>+---------------------------------------------------------------------------+
>| Rough conditions in the Southern Ocean. Read about the brutal challenges.
>|
>| http://service.bfast.com/bfast/click?bfmid=22673860=32743498=bt_challenge
>|
>+---------------------------------------------------------------------------+
>
>_______________________________________________
>Public-list mailing list -- Public-list at alberg30.org
>http://www.alberg30.org/mailman/listinfo/public-list
>To unsubscribe: email to Public-list-request at alberg30.org
>Include command "unsubscribe <password>" in subject or body.
>Use command "help" for more options.
>
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com
+---------------------------------------------------------------------------+
| Rough conditions in the Southern Ocean. Read about the brutal challenges. |
| http://service.bfast.com/bfast/click?bfmid=22673860=32743498=bt_challenge |
+---------------------------------------------------------------------------+
_______________________________________________
Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.
986448036.0
More information about the Public-List
mailing list