[Alberg30] Help-Big Problem

[T. Kevin Blanc]

I doubt there is an A30 afloat that hasn't experienced
this (I've heard that the newer ones are better in
this regard). There are proven ways to fix this. I'm
sure you'll get help on this list from someone that
has completed the project recently (mine was done
before I purchased it).

You may want to consider easing the tension on the rig
if all the stays seem really tight. Mike Lehman,
guidance on rig tension?
 
--- SwiftLaw at aol.com wrote:
> I am in the process of completing my acquisition of
> hull #222.  Today I had 
> the yard boss engineer on board. BIG PROBLEM -  the
> main bracing beam under 
> the deck mount of the Main mast is indented
> downward, It appears as if the 
> mast is trying to come through the deck. Not too
> much delamination, but, for 
> illustration, the forward cabin door is about 3/4
> inch from closing due to 
> the depression of the beam.
> 
> Any experience with this? Can I shore it up or
> should I not complete this 
> purchase and give up on a boat I am already in love
> with ???? 
> Help-Advice-comments please.
> 
> Thanks
> 
> Tom Swift- Chicago
> 

 +-----------------------------------------------------------+
 |       Shop SailNet for your Spring outfitting needs.      |
 | http://www.myaffiliateprogram.com/u/sailnet/t.asp?id=1066 |
 +-----------------------------------------------------------+

_______________________________________________
Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 988584812.0