[Alberg30] Re: prop for A30

[Mike Lehman]

The prop that came with the boat with an Atomic 4 was a 13x7 RH (right hand) prop on the standard 7/8" shaft.

Mike Lehman
840 Mill Creek Road
Arnold, MD 21012
(410) 544-9067 (Home)
(443) 253-7054 (Mobile)

sail_505 at hotmail.com

  ----- Original Message ----- 
  From: Lorelei23 at aol.com 
  To: public-list at alberg30.org 
  Sent: Wednesday, February 21, 2001 10:03 AM
  Subject: [Alberg30] Re: prop for A30


  I have just had my Alberg 30 hauled to have a bottom job and do other work 
  while she is out of the water.  Upon pulling her out, someone made the 
  comment that the prop doesn't look like it's the right one for this boat.   
  With my limited expertise, what I can determine is that it is a two-blade 
  prop.  Does anyone know if this is appropriate for my boat?  I would 
  appreciate any assistance you could offer about specs for this.  My engine is 
  an Atomic 4 (if that helps). 

  Also, the piece of chrome that would go across the stern is damaged and needs 
  to be replaced.  I have the old bent piece.  Any suggestions on having a new 
  piece made for this? 

  Also, would you recommend installing roller furling?  If so, what type/brand ? 

  Thanks,  Lorelei 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alberg30.org/pipermail/public-list-alberg30.org/attachments/20010221/702815f0/attachment-0008.htm>