[Alberg30] Keels-Casting Iron
RABBIT649 at aol.com
RABBIT649 at aol.com
Sat Jun 23 21:38:14 PDT 2001
Whitby was no stranger to casting iron. Before and during the time they were
building the A 30, they built a FRP copy of a 25' Folkboat that had an
external, bolted on, pig iron ballast that, of course was cast in one piece.
I know because I owned one and it was one of the reasons for moving up to the
A 30.
Paul
#23 Ashwagh
In a message dated 6/21/01 1:05:06 PM Eastern Daylight Time,
taylor at echlinvests.com writes:
> Now you've thrown me. I was always told that Kurt Hansen used iron slabs -
> cause he found it too expensive to cast lead in a mould. My understanding
> was that the workers hand laid the iron slabs in the fiberglass (after it
> cured) and then filled the hollows with vermiculite.
>
> Lew Dohn owned Caliban #78 - built in 1965 (he retired the Great Lakes
> Championship trophy after winning it 3 times in a row) and he "special
> ordered" the boat with a lead keel after writing to Carl Alberg. Lew told
> me that Hansen got mad at having to cast the lead - and wouldn't cast lead
> for anyone else afterwards.
>
> So - if Hansen didn't want to cast the lead - why would he cast the iron???
>
> I would much rather have a one-piece iron casting for ballast - than iron
> slabs hand laid as I described.
>
> The club member I mentioned is a yacht broker - he never built an Alberg 30
> - so I don't know if he has direct knowledge. But he told me that's how
> other boat builders filled their keels.
> --
> Taylor Echlin
> le papillon 612
>
> ----------
> >From: George Dinwiddie <gdinwiddie at min.net>
>
> > Does he have any direct knowledge, or was he just speculating? I've
> > never heard of an Alberg 30 with anything but a one-piece casting
> > for ballast.
> >
> > - George
> >
> >
> >> Taylor Echlin said:
> >> [snip]
> >> He said that the ballast in Alberg 30s can be iron slabs, pellets, and
> even
> >> nails.
+------------------------------------------------------------------+
| Simrad TP20 w/ FREE remote, on sale at Sailnet. Search "SIMTP20" |
| http://www.myaffiliateprogram.com/u/sailnet/t.asp?id=1066 |
+------------------------------------------------------------------+
_______________________________________________
Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.
993357494.0
More information about the Public-List
mailing list