[Alberg30] Silencing those mast noises?

[Gord Laco]

Hi Randy -

I cured mine by using the old wires to pull through new ones with
electrician's tie wraps every couple of feet.  I used big ones and had the
tails project at random tangents.  Complete cure and took only about 20
minutes.

Gord
#426 Surprise
----- Original Message -----
From: Randy Katz <randyk at bertschi.org>
To: <gord at transatmarine.com>
Sent: Sunday, September 09, 2001 1:40 PM
Subject: [Alberg30] Silencing those mast noises?


> ON to the next project--
>
>     Anyone have a way to quiet down those dang wires (2) in the mast
> *without* taking the pole down?  I was wondering about drilling a few
small
> holes and injecting some of the foam insulation stuff-- maybe every
several
> feet.  Wouldn't want to cause problems with removing/changing wiring later
> on though....
>
>     Other ideas?
>
> Thanks--
>
> OOOOOOOOOOOOOOOO
> Randy Katz
> 910 - 32nd Ave.
> Seattle, WA. 98122
> USA
> 206-323-1941
> KKKKKKKKKKKKKKKKKKKK
>
>  +-----------------------------------------------------+
>  |     http://www.alberg30.org/store/Galison.html      |
>  | Beautiful notecards of the sea, and other fine art. |
>  +-----------------------------------------------------+
>
> _______________________________________________
> Public-list mailing list -- Public-list at alberg30.org
> http://www.alberg30.org/mailman/listinfo/public-list
> To unsubscribe: email to Public-list-request at alberg30.org
> Include command "unsubscribe <password>" in subject or body.
> Use command "help" for more options.
>
>

 +-----------------------------------------------------+
 |     http://www.alberg30.org/store/Galison.html      |
 | Beautiful notecards of the sea, and other fine art. |
 +-----------------------------------------------------+

_______________________________________________
Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 1000124044.0