[Alberg30] Jib sheet tracks

[sousa, stephen]

John,
 
I removed the entire genny track and didn't have any issues with loose toe
rails or leaks. I did use 4200 in the screw holes upon reinstallation and
new bolts.
 
Stephen

-----Original Message-----
From: John Raaymaker [mailto:squire51 at hotmail.com]
Sent: Thursday, April 18, 2002 4:05 PM
To: public-list at alberg30.org
Subject: [Alberg30] Jib sheet tracks


Hi Guys
 
    Thanks for the input....some interesting options to ponder.  I had
wondered about doing this job without removing tracks. The reason is that
I'm concerned about losing the seal between the toe rail and the deck by
removing all of the bolts. My thought was to make shorter sections of spacer
and insert by slightly loosening the bolts. If I take the track right off an
awful long section of toe rail is going to be loose. Do you think the seal
there would stay intact. If not and I have to remove the tracks,any
suggestions for rebedding this area. Thanks all.
 
    John   #182

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alberg30.org/pipermail/public-list-alberg30.org/attachments/20020418/340c41a1/attachment-0004.htm>