[Alberg30] Jib sheet tracks

[Mike Lehman]

You won't loose the seal between the toe rail and the boat if you remove the 
track. If the track has never been off, the seal between the track bolts and 
the toe rail need to be re-bedded anyway.


----Original Message Follows----
From: "John Raaymaker" <squire51 at hotmail.com>
Reply-To: public-list at alberg30.org
To: <public-list at alberg30.org>
Subject: [Alberg30] Jib sheet tracks
Date: Thu, 18 Apr 2002 16:04:35 -0400

Hi Guys

     Thanks for the input....some interesting options to ponder.  I had 
wondered about doing this job without removing tracks. The reason is that 
I'm concerned about losing the seal between the toe rail and the deck by 
removing all of the bolts. My thought was to make shorter sections of spacer 
and insert by slightly loosening the bolts. If I take the track right off an 
awful long section of toe rail is going to be loose. Do you think the seal 
there would stay intact. If not and I have to remove the tracks,any 
suggestions for rebedding this area. Thanks all.

     John   #182


_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp.

 +-----------------------------------------------------------+
 | ** Skymate Windmeter $18.00 off! Product code JDCSM-18 ** |
 | http://www.myaffiliateprogram.com/u/sailnet/t.asp?id=1066 |
 +-----------------------------------------------------------+


_______________________________________________
Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 1019221260.0