[Alberg30] Stick wiring help needed

[Jim Watson]

Hi Folks:

Thought I would share the good news.... I stepped the mast on the A30 and
rewired the steamer light. While I was wiring I figured, what the hell and
added an anchor light. Still working on my wiring though. It appears that
current is not passing through normal channels. I had to wire-in my port and
starboard running lights in series with the steamer light and the anchor
light (port is anchor, starboard is steamer).

I noticed a wire diagram posted from the A30 web site. Helpful but hard to
read. My big question to you generous folks is:

Does the anchor light run on its own through the first or second position of
the running light switch on the panel?

I traced the wires from the panel and didn't see a separate lead for the
anchor light. The whole boat is wired with lamp cord and consequently should
be replaced. I guess I have a second question:

Does anyone have a complete wiring diagram for the whole ship?

I have some ideas on running the anchor light on a separate circuit but I
would like to do this right. Any ideas?

Thanks in advance.

Jim
CaVa A-30 1968

 +-----------------------------------------------------------+
 | Sale on Yale & New England Ropes.  Save up to 25 percent. |
 | http://www.myaffiliateprogram.com/u/sailnet/t.asp?id=1066 |
 +-----------------------------------------------------------+

_______________________________________________
Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.