[Alberg30] A4 over heating

John P Reber John.P.Reber at mail.jci.tju.edu
Wed Aug 14 10:38:41 PDT 2002



Brian and Elaine Timmins wrote:

>>>      
>>>
>No.  The water goes through the pump, then to a "T" fitting on the
>inspection port (answer to your other Email) where preferential water flow
>occurs. It either goes up to the bypass with a cold engine, or through the
>block to the thermostat with a warm engine.
>
>In your test where you blocked off the flow to the bypass, all the water
>should have gone through the block and thermostat then manifold and
>exhaust.(in that order) When you did the test with the thermostat housing
>off, I would expect a mini guyser to shoot out. I've never actually tried
>this but logic says it should be a lot of water.
> Good Luck finding your blockage,
>Brian
>  
>
Thanks, the above gives me a much better understanding on the water flow.

Unfortunately we're heading for the Keys  tomorrow and won't be able to 
test my new found knowledge for another week :-(

-- 
John P. Reber
Perdida, Alberg30 #456



 +-----------------------------------------------------------+
 | Sale on Yale & New England Ropes.  Save up to 25 percent. |
 | http://www.myaffiliateprogram.com/u/sailnet/t.asp?id=1066 |
 +-----------------------------------------------------------+

_______________________________________________
Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 1029346721.0


More information about the Public-List mailing list