[Alberg30] Head Seacock Placement

Dave Terrell DTERRELL.GWSTAFF.GWNMC at message.nmc.edu
Wed Aug 21 14:04:37 PDT 2002


now I get it. did not pay attention. The water intake seacock for #432 is in a compartment below the port salon  bench which is just aft of head. 

>>> sousa_stephen at emc.com 08/21/02 04:03PM >>>
Mike,
 
Since you have seen both designs #272 and #114 were the same it seems that
on the newer boats Whitby made the seacock accessible. In your opinion since
both of the original holes were filled with epoxy, would it better to
install the thru hulls and ball valves under the settee?
 
Stephen
 
 

-----Original Message-----
From: Mike Lehman [mailto:sail_505 at hotmail.com] 
Sent: Wednesday, August 21, 2002 3:32 PM
To: public-list at alberg30.org 
Subject: RE: [Alberg30] Head Seacock Placement



Mine on #505 is in the same place as Neal's. On Valency #272 it is forward
of the main cabin bulkhead under the shelf that holds the toilet. On #114
????

Mike Lehman 
"Gilleleje" #505 

Hammer: Originally employed as a weapon of war, the hammer nowadays is used
as a kind of divining rod to locate expensive car parts not far from the
object we are trying to hit. 


----Original Message Follows---- 
From: Neal Jackson 
Reply-To: public-list at alberg30.org 
To: "'public-list at alberg30.org'" 
Subject: RE: [Alberg30] Head Seacock Placement 
Date: Wed, 21 Aug 2002 14:23:45 -0400 
Mine (No. 486, with a liner) is located under the port settee, about six 
inches aft of the wall that separates that locker from the head area. I is 
about four inches inside the vertical frame of that settee. 
-----Original Message----- 
From: sousa, stephen (ENG) [mailto:sousa_stephen at emc.com] 
Sent: Wednesday, August 21, 2002 2:10 PM 
To: 'public-list at alberg30.org' 
Subject: [Alberg30] Head Seacock Placement 
I am in the process of preparing the installation of the new head and 
holding tank. I removed the false floor from the head in #114 to find the 
original floor in place (boy does that sae some time) . The fittings were 
removed from the hull and holes filled with epoxy. The 1 1/2 fitting backing

plate remains on the hull so that placement is straight forward. The 
question I have and hopefully someone can assist is the placement for the 
3/4 thru hull fitting. It would seem to be mounted under in the hull under 
the floor with the hose running up through the hole into the head intake. 
Would anyone have a recommendation or suggestion? 
Thanks, 
Stephen 
Carina Vela 
#114 

  _____  

Chat with friends online, try MSN Messenger: Click
<http://g.msn.com/1HM1ENUS/c144??PS=47575> Here
+-----------------------------------------------------------+ | Sale on Yale
& New England Ropes. Save up to 25 percent. | |
http://www.myaffiliateprogram.com/u/sailnet/t.asp?id=1066 |
+-----------------------------------------------------------+
_______________________________________________ Public-list mailing list --
Public-list at alberg30.org 
http://www.alberg30.org/mailman/listinfo/public-list To unsubscribe: email
to Public-list-request at alberg30.org Include command "unsubscribe " in
subject or body. Use command "help" for more options.


 +-----------------------------------------------------------+
 | Sale on Yale & New England Ropes.  Save up to 25 percent. |
 | http://www.myaffiliateprogram.com/u/sailnet/t.asp?id=1066 |
 +-----------------------------------------------------------+

_______________________________________________
Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 1029963877.0


More information about the Public-List mailing list