[Alberg30] Fasteners

sousa, stephen (ENG) sousa_stephen at emc.com
Mon Aug 5 19:27:32 PDT 2002


Home Depot has the bits, I just purchased a package last week. The
replacement screws are available from Jamestown Dist in Bristol, RI or a
local marine supplier. I generally use a ice pick to clean the head prior to
removal otherwise the bronze head will strip with the bit.
 
Stephen

-----Original Message-----
From: Mary & Bill Mahony [mailto:mabwjm at starpower.net]
Sent: Monday, August 05, 2002 6:23 PM
To: public-list at alberg30.org
Subject: [Alberg30] Fasteners


What kind of fastener is used in the Alberg 30 for securing woodwork, wood
trim, stove, etc.?  Is it a screw or rivet?  It looks like a screwhead with
a single square slot--I'm not familiar with this type of screw or the name
of the bit one would use to tighten/loosen.
 
Thanks!

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alberg30.org/pipermail/public-list-alberg30.org/attachments/20020805/08d1eafa/attachment-0008.htm>


More information about the Public-List mailing list