[Alberg30] Fasteners

[Wally Moran]

re my earlier post - there are a variety of sizes of Robertson - some 
with not much difference in size. If you are having a problem with 
stripping the screw, get the next larger size.

Wally

>Home Depot has the bits, I just purchased a package last week. The 
>replacement screws are available from Jamestown Dist in Bristol, RI 
>or a local marine supplier. I generally use a ice pick to clean the 
>head prior to removal otherwise the bronze head will strip with the 
>bit.
>
>Stephen
>
>-----Original Message-----
>From: Mary & Bill Mahony [mailto:mabwjm at starpower.net]
>Sent: Monday, August 05, 2002 6:23 PM
>To: public-list at alberg30.org
>Subject: [Alberg30] Fasteners
>
>What kind of fastener is used in the Alberg 30 for securing 
>woodwork, wood trim, stove, etc.?  Is it a screw or rivet?  It looks 
>like a screwhead with a single square slot--I'm not familiar with 
>this type of screw or the name of the bit one would use to 
>tighten/loosen.
>
>Thanks!


-- 
The gods do not deduct from man's allotted span the hours spent in 
sailing. Anon
www.georgianbaysailing.ca for interesting reading for sailors
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alberg30.org/pipermail/public-list-alberg30.org/attachments/20020806/a45ae178/attachment-0008.htm>