[Alberg30] Fasteners

Brian and Elaine Timmins timmins at optonline.net
Mon Aug 5 20:06:14 PDT 2002


Yes, all the other posts are correct.  Robertson Drive (most are #2) Bits and/or drivers are readily available in better hardware supply stores. Just to let you know, I recently purchased a box of stainless steel robertson drive (also generically called square drive) #10 X 2" wood screws at a Sears Hardware store. They sell them as deck building screws. I think Home Depot sells them also.
Brian
  ----- Original Message ----- 
  From: Mary & Bill Mahony 
  To: public-list at alberg30.org 
  Sent: Monday, August 05, 2002 6:23 PM
  Subject: [Alberg30] Fasteners


  What kind of fastener is used in the Alberg 30 for securing woodwork, wood trim, stove, etc.?  Is it a screw or rivet?  It looks like a screwhead with a single square slot--I'm not familiar with this type of screw or the name of the bit one would use to tighten/loosen.

  Thanks!
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alberg30.org/pipermail/public-list-alberg30.org/attachments/20020805/e644eb2f/attachment-0008.htm>


More information about the Public-List mailing list