[Alberg30] Fasteners

Wally Moran helm at georgianbaysailing.ca
Mon Aug 5 22:06:59 PDT 2002


I sense an opportunity here - anyone want to buy some SS Robertson 
screws and screwdriver sets? They are as common as beach sand here...

Wally

>Yes, all the other posts are correct.  Robertson Drive (most are #2) 
>Bits and/or drivers are readily available in better hardware supply 
>stores. Just to let you know, I recently purchased a box of 
>stainless steel robertson drive (also generically called square 
>drive) #10 X 2" wood screws at a Sears Hardware store. They sell 
>them as deck building screws. I think Home Depot sells them also.
>Brian
>
>----- Original Message -----
>From: <mailto:mabwjm at starpower.net>Mary & Bill Mahony
>To: <mailto:public-list at alberg30.org>public-list at alberg30.org
>Sent: Monday, August 05, 2002 6:23 PM
>Subject: [Alberg30] Fasteners
>
>What kind of fastener is used in the Alberg 30 for securing 
>woodwork, wood trim, stove, etc.?  Is it a screw or rivet?  It looks 
>like a screwhead with a single square slot--I'm not familiar with 
>this type of screw or the name of the bit one would use to 
>tighten/loosen.
>
>Thanks!


-- 
The gods do not deduct from man's allotted span the hours spent in 
sailing. Anon
www.georgianbaysailing.ca for interesting reading for sailors
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alberg30.org/pipermail/public-list-alberg30.org/attachments/20020806/a9f301fe/attachment-0008.htm>


More information about the Public-List mailing list