[Alberg30] Steam Light Wiring

[George Dinwiddie]

Jim,

It sounds as if you may have sponges or something filling the mast.  If 
so, this is the reason I don't do that.  It makes it very hard to run a 
new wire.  Otherwise it's usually possible to drop a piece of fishing 
line with a small weight, pull it out through a hole at the bottom of 
the mast, and run a new wire.  You may have to drop the mast to get a 
new wire through.

  - George

Jim Watson wrote:
> All:
> 
> Found that my spreader light was out and no current was passing through the
> mast to the light. I tried to run wire through but the wire snapped. No way
> at the moment to snake it through. What options do I have to replace the
> wiring? Any ideas?
> 
> Thanks,
> Jim '549'

-- 
  ----------------------------------------------------------------------
   George Dinwiddie                             gdinwiddie at alberg30.org
   The gods do not deduct from man's allotted span those hours spent in
   sailing.                                    http://www.Alberg30.org/
  ----------------------------------------------------------------------

 +-----------------------------------------------------------+
 | Sale on Yale & New England Ropes.  Save up to 25 percent. |
 | http://www.myaffiliateprogram.com/u/sailnet/t.asp?id=1066 |
 +-----------------------------------------------------------+

_______________________________________________
Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 1029722684.0