[Alberg30] Steam Light Wiring

[Kevin Blanc]

Did you try an electricians snake? They are inexpensive and stiff enough 
to push through crud.

George Dinwiddie wrote:

> Jim,
>
> It sounds as if you may have sponges or something filling the mast.  
> If so, this is the reason I don't do that.  It makes it very hard to 
> run a new wire.  Otherwise it's usually possible to drop a piece of 
> fishing line with a small weight, pull it out through a hole at the 
> bottom of the mast, and run a new wire.  You may have to drop the mast 
> to get a new wire through.
>
>  - George
>
> Jim Watson wrote:
>
>> All:
>>
>> Found that my spreader light was out and no current was passing 
>> through the
>> mast to the light. I tried to run wire through but the wire snapped. 
>> No way
>> at the moment to snake it through. What options do I have to replace the
>> wiring? Any ideas?
>>
>> Thanks,
>> Jim '549'
>
>


 +-----------------------------------------------------------+
 | Sale on Yale & New England Ropes.  Save up to 25 percent. |
 | http://www.myaffiliateprogram.com/u/sailnet/t.asp?id=1066 |
 +-----------------------------------------------------------+

_______________________________________________
Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 1029966325.0