[Alberg30] Deck Repairs

[DanaB]

FWIIW- the Alberg  35 was built by Pearson Yachts.

Dana Berube
1960 Pearson Triton #99

On 02/01/2002 07:52, "Mike Lehman" <sail_505 at hotmail.com> wrote:

> Buy it! Whitby built a good boat and just like any boat there will always be
> a repair list. Do the repairs over time.
> 
> 
> ----Original Message Follows----
> From: "Paloma L. Hawry" <phawry at actoras.com>
> Reply-To: public-list at alberg30.org
> To: <public-list at alberg30.org>
> Subject: RE: [Alberg30] Deck Repairs
> Date: Thu, 31 Jan 2002 17:48:40 -0600
> 
> I appreciate all the responses to our quandry.  It is a major decision for
> us since we will invest mightily - heart soul and money in whatever boat we
> find.
> 
> We have had a very thorough survey performed with a moisture meter and have
> drawings of where the suspect areas are. The surveyor's moisture meter
> showed the damage to be essentially the length of both side decks, virtually
> at every stanchion, no foredeck damage, a a small area on the cabin top.
> (Mast step was rebuilt adequately and left open for inspection - no apparent
> moisture damage in that area).  Our surveyor is locally known as "Dr. Doom"
> so while we appreciate his thoroughness, we are left wondering how extensive
> or serious the problem really is given that we know we are looking at a 1965
> boat which is bound to have problems.  There are no noticeable soft spots.
> He passed the hull and other structural aspects as alright.  The boat has
> been in the water each year (fresh water) but has hardly been sailed so it
> has not had the structural stress of racing and cruising, just the stress of
> slow neglect.  Rigging, sails, are sound, electronics minimal, AC wiring non
> compliant but for us unnecessary.   Has an old Atomic 4, but my husband is
> very comfortable with engine work, and we have already priced what a rebuild
> would cost.  Our budget accounts for the need to replace and upgrade many
> items, but it is the deck problem that has us in a quandry...
> 
> Thus far my research and your responses have shown three distinct approaches
> to repairing the decks:
> 1) drill holes on a 1" a grid in the damaged areas, dry thoroughtly, then
> fill with epoxy and sand/refinish
> 2) cutout and retain top skin (remove all rotted core attached), remove
> damaged core, sand down to lower skin, replace with new core material (foam
> or plywood) refill with resin to the correct level, replace and fair-in the
> old skin, and repaint surface as needed
> 3) Cut-out area, remove damaged core, replace with foam or wood and rebuild
> glass deck.
> 
> Of these, it would seem to me that the second choice might make the most
> sense as long as the original skin was in fairly good shape.  This would
> largely preserve the original contours and molded non-skid and reduce the
> fairing and surface areas requiring rebuild to look good.   Any thoughts in
> comparing these approaches?  And again, does anyone know of a way to find an
> individual tradesperson who might help us with the repairs?
> 
> I'll stop cluttering up the cyberwaves now...
> 
> Thanks All
> 
> 
> 
> 
> Paloma L. Hawry, Partner
> Actoras Consulting Group
> 1821 Walden Office Square Suite 400
> Schaumburg, IL 60173
> Office:  (847) 622-8812
> Cell: (847) 274-3086
> Fax: (847)631-0869
> 
> 
> -----Original Message-----
> From:    public-list-admin at alberg30.org
[mailto:public-list-admin at alberg30.org]
> On Behalf Of greg
> Sent:    Thursday, January 31, 2002 5:03 PM
> To:    public-list at alberg30.org
> Subject:    Re: [Alberg30] Deck Repairs
> 
> I may regret sticking my nose in here. Having been involved in the repair of
> such
> things on our 1968 A30 #312. We have replaced our cockpit soul and repaired
> side
> deck de lamination in areas of the non skid with good result. It is not as
> scary
> as it looks... just time consuming. We did not cut away the wet de-laminated
> areas  of the deck  ( not true of the cockpit sole) but drilled 1/4 inch
> holes on
> a 1 inch grid over the wet areas and then with lamps dried the areas till
> the
> moisture meter showed an acceptable content. We then injected as much epoxy
> resin
> as the delaminated area would except and filled and smoothed the area with
> thickened epoxy. Over which we applied a new non skid surface with mron(sp)
> and
> Awlgrip's silica. We did this on the entire deck  and cockpit. It looked
> great
> when complete. Drying was not a fast process it took days and the project
> took
> alot of time away from sailing.
> 
> Kindest Regards- Greg
> 
> PS: I'm in west Michigan if you want to talk. 616 454 5225
> PPS: Same for the cockpit sole.
> 
> "Paloma L. Hawry" wrote:
> 
>> 
>> We need to let the owner know soon if we are willing to purchase the boat
>> and tackle this work.  Our expectation is that we are looking at deck
>> repairs anywhere between $2000 and $7000 range - assuming we do some of
> the
>> work ourselves. (We are handy and willing to do much of the prep and
>> painting/finish work, but haven't got the experience or sufficient time
> for
>> the structural work).  As we are on a very tight budget, we can't afford
>> major surprises beyond that range.
>> 
> 
> +-------------------------------------------------------------------+
> |  Foul weather?  Deep discounts on Henri Lloyd and 2001 Gill gear. |
> | *** http://www.myaffiliateprogram.com/u/sailnet/t.asp?id=1066 *** |
> +-------------------------------------------------------------------+
> 
> 
> _______________________________________________
> Public-list mailing list -- Public-list at alberg30.org
> http://www.alberg30.org/mailman/listinfo/public-list
> To unsubscribe: email to Public-list-request at alberg30.org
> Include command "unsubscribe <password>" in subject or body.
> Use command "help" for more options.
> 
> +-------------------------------------------------------------------+
> |  Foul weather?  Deep discounts on Henri Lloyd and 2001 Gill gear. |
> | *** http://www.myaffiliateprogram.com/u/sailnet/t.asp?id=1066 *** |
> +-------------------------------------------------------------------+
> 
> 
> _______________________________________________
> Public-list mailing list -- Public-list at alberg30.org
> http://www.alberg30.org/mailman/listinfo/public-list
> To unsubscribe: email to Public-list-request at alberg30.org
> Include command "unsubscribe <password>" in subject or body.
> Use command "help" for more options.
> 
> 
> 
> _________________________________________________________________
> Chat with friends online, try MSN Messenger: http://messenger.msn.com
> 
> +-------------------------------------------------------------------+
> |  Foul weather?  Deep discounts on Henri Lloyd and 2001 Gill gear. |
> | *** http://www.myaffiliateprogram.com/u/sailnet/t.asp?id=1066 *** |
> +-------------------------------------------------------------------+
> 
> 
> _______________________________________________
> Public-list mailing list -- Public-list at alberg30.org
> http://www.alberg30.org/mailman/listinfo/public-list
> To unsubscribe: email to Public-list-request at alberg30.org
> Include command "unsubscribe <password>" in subject or body.
> Use command "help" for more options.
> 

 +-------------------------------------------------------------------+
 |  Foul weather?  Deep discounts on Henri Lloyd and 2001 Gill gear. |
 | *** http://www.myaffiliateprogram.com/u/sailnet/t.asp?id=1066 *** |
 +-------------------------------------------------------------------+


_______________________________________________
Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 1012568265.0