[Alberg30] Deck Repairs

Mike Lehman sail_505 at hotmail.com
Mon Feb 4 14:22:52 PST 2002


I shared your same experience with a Boston Whaler, never could get it dry 
enough for the repair to work. I sold the boat to someone who didn't care 
that the deck was delaminated.

----Original Message Follows----
From: Berube5 <Berube5 at cox.net>
Reply-To: public-list at alberg30.org
To: <public-list at alberg30.org>
Subject: Re: [Alberg30] Deck Repairs
Date: Mon, 04 Feb 2002 15:21:54 -0500

Bill,

A word of caution- Pearson used balsa in the construction of their decks.
>From personal experience I can tell you that the "drill and dry" method is
not a rapid repair- time wise.

Balsa holds moisture tenaciously. I have drilled a pattern of holes into the
core in the manner that others have suggested. My boat has been stored
indoors and heated for over a year. After NINE months of "drying out" I
could still pull up wet drill cores of balsa after drilling new test holes.

I used the heat lamp approach- to little effect. You also need to be careful
not to overheat the fiberglass- Don Casey says that if it is too hot to
touch- it is too hot. Obviously, if the boat is outdoors it will not dry out
if the decks are frozen.

I don't want to discourage you- but it is important be realistic and
patient. A job like this should not be rushed. An epoxy repair will not work
if the core is still wet.

Good luck,

Dana Berube
1960 Pearson Triton (balsa core deck)

On 02/04/2002 13:40, "Furey, Bill (CORP)" <bill.furey at corporate.ge.com>
wrote:

 > Bria & Gord: Thanks-the drying process may be tricky-the boat
 > is uncovered(reason for the problem in the first place)I guess
 > wait for a dry weather pattern, drill holes, & rig lamps?
 >
 > -----Original Message-----
 > From: Gord Laco [mailto:gord at transatmarine.com]
 > Sent: Monday, February 04, 2002 8:32 AM
 > To: public-list at alberg30.org
 > Subject: Re: [Alberg30] Deck Repairs
 >
 >
 > I've done the same job - I dip the screws in margerine to keep the epoxy
 > from holding them.
 >
 > Gord
 > KC426 Surprise
 > ----- Original Message -----
 > From: Brian and Elaine Timmins <timmins at optonline.net>
 > To: <public-list at alberg30.org>
 > Sent: Sunday, February 03, 2002 5:07 PM
 > Subject: Re: [Alberg30] Deck Repairs
 >
 >
 >> Bill,
 >>    Drilling into the deck where it is delaminated or the core is rotted 
is
 >> easy. The top layer of fiberglass is only 1/8 - 3/16" or so. You'll know
 > for
 >> sure after one or two holes. When the drill bit penetrates the skin,
 > you'll
 >> feel the difference because then it's drilling air (or rotted core which
 >> feels like air). The hard part is stopping before you go further. If
 > you're
 >> used to using a drill, it's easy. If you're not, you will be quickly. 
For
 >> any holes that make it through the lower skin, I recommend using 
polyester
 >> putty (Bondo or Body fill stuff) to close the hole. It works better than
 >> most tapes.
 >>    I suggest using a 3/16" bit. When you finally get to inject the 
epoxy,
 >> start at the lowest point and keep injecting until it starts to come out
 > of
 >> other holes. When that happens, put a #10 sheet metal screw (only use
 > brand
 >> new screws) into the hole where the epoxy is coming out, and keep
 > injecting
 >> into that same hole if possible. It's better to fill the voids from the
 >> bottom up. If you use brand new screws to close the holes as they get
 > full,
 >> the oil from manufacturing will prevent the epoxy from bonding to them. 
If
 >> you use old screws, or heavily handled screws, they may become part of 
the
 >> deck forever.
 >>    Good luck, it's easier than it sounds.
 >> Brian    #497
 >> ----- Original Message -----
 >> From: "Furey, Bill (CORP)" <bill.furey at corporate.ge.com>
 >> To: <public-list at alberg30.org>
 >> Sent: Sunday, February 03, 2002 11:23 AM
 >> Subject: RE: [Alberg30] Deck Repairs
 >>
 >>
 >>> Hi Greg: I have an Alberg 35 with some wet areas. two questions:
 >>> 1. how deep for the holes & can you tell readily that you have'nt
 > drilled
 >>> too far?
 >>> 2. How can I get &how much, what brand etc for a moisture meter.
 >>> thks.
 >>>
 >>> -----Original Message-----
 >>> From: greg [mailto:greg at vandenbergphoto.com]
 >>> Sent: Thursday, January 31, 2002 6:03 PM
 >>> To: public-list at alberg30.org
 >>> Subject: Re: [Alberg30] Deck Repairs
 >>>
 >>>
 >>> I may regret sticking my nose in here. Having been involved in the
 > repair
 >> of
 >>> such
 >>> things on our 1968 A30 #312. We have replaced our cockpit soul and
 >> repaired
 >>> side
 >>> deck de lamination in areas of the non skid with good result. It is not
 > as
 >>> scary
 >>> as it looks... just time consuming. We did not cut away the wet
 >> de-laminated
 >>> areas  of the deck  ( not true of the cockpit sole) but drilled 1/4 
inch
 >>> holes on
 >>> a 1 inch grid over the wet areas and then with lamps dried the areas
 > till
 >>> the
 >>> moisture meter showed an acceptable content. We then injected as much
 >> epoxy
 >>> resin
 >>> as the delaminated area would except and filled and smoothed the area
 > with
 >>> thickened epoxy. Over which we applied a new non skid surface with
 >> mron(sp)
 >>> and
 >>> Awlgrip's silica. We did this on the entire deck  and cockpit. It 
looked
 >>> great
 >>> when complete. Drying was not a fast process it took days and the
 > project
 >>> took
 >>> alot of time away from sailing.
 >>>
 >>> Kindest Regards- Greg
 >>>
 >>> PS: I'm in west Michigan if you want to talk. 616 454 5225
 >>> PPS: Same for the cockpit sole.
 >>>
 >>> "Paloma L. Hawry" wrote:
 >>>
 >>>>
 >>>> We need to let the owner know soon if we are willing to purchase the
 >> boat
 >>>> and tackle this work.  Our expectation is that we are looking at deck
 >>>> repairs anywhere between $2000 and $7000 range - assuming we do some
 > of
 >>> the
 >>>> work ourselves. (We are handy and willing to do much of the prep and
 >>>> painting/finish work, but haven't got the experience or sufficient
 > time
 >>> for
 >>>> the structural work).  As we are on a very tight budget, we can't
 > afford
 >>>> major surprises beyond that range.
 >>>>
 >>>
 >>>  +-------------------------------------------------------------------+
 >>>  |  Foul weather?  Deep discounts on Henri Lloyd and 2001 Gill gear. |
 >>>  | *** http://www.myaffiliateprogram.com/u/sailnet/t.asp?id=1066 *** |
 >>>  +-------------------------------------------------------------------+
 >>>
 >>>
 >>> _______________________________________________
 >>> Public-list mailing list -- Public-list at alberg30.org
 >>> http://www.alberg30.org/mailman/listinfo/public-list
 >>> To unsubscribe: email to Public-list-request at alberg30.org
 >>> Include command "unsubscribe <password>" in subject or body.
 >>> Use command "help" for more options.
 >>>  +-------------------------------------------------------------------+
 >>>  |  Foul weather?  Deep discounts on Henri Lloyd and 2001 Gill gear. |
 >>>  | *** http://www.myaffiliateprogram.com/u/sailnet/t.asp?id=1066 *** |
 >>>  +-------------------------------------------------------------------+
 >>>
 >>>
 >>> _______________________________________________
 >>> Public-list mailing list -- Public-list at alberg30.org
 >>> http://www.alberg30.org/mailman/listinfo/public-list
 >>> To unsubscribe: email to Public-list-request at alberg30.org
 >>> Include command "unsubscribe <password>" in subject or body.
 >>> Use command "help" for more options.
 >>>
 >>
 >>  +-------------------------------------------------------------------+
 >>  |  Foul weather?  Deep discounts on Henri Lloyd and 2001 Gill gear. |
 >>  | *** http://www.myaffiliateprogram.com/u/sailnet/t.asp?id=1066 *** |
 >>  +-------------------------------------------------------------------+
 >>
 >>
 >> _______________________________________________
 >> Public-list mailing list -- Public-list at alberg30.org
 >> http://www.alberg30.org/mailman/listinfo/public-list
 >> To unsubscribe: email to Public-list-request at alberg30.org
 >> Include command "unsubscribe <password>" in subject or body.
 >> Use command "help" for more options.
 >>
 >
 > +-------------------------------------------------------------------+
 > |  Foul weather?  Deep discounts on Henri Lloyd and 2001 Gill gear. |
 > | *** http://www.myaffiliateprogram.com/u/sailnet/t.asp?id=1066 *** |
 > +-------------------------------------------------------------------+
 >
 >
 > _______________________________________________
 > Public-list mailing list -- Public-list at alberg30.org
 > http://www.alberg30.org/mailman/listinfo/public-list
 > To unsubscribe: email to Public-list-request at alberg30.org
 > Include command "unsubscribe <password>" in subject or body.
 > Use command "help" for more options.
 > +-------------------------------------------------------------------+
 > |  Foul weather?  Deep discounts on Henri Lloyd and 2001 Gill gear. |
 > | *** http://www.myaffiliateprogram.com/u/sailnet/t.asp?id=1066 *** |
 > +-------------------------------------------------------------------+
 >
 >
 > _______________________________________________
 > Public-list mailing list -- Public-list at alberg30.org
 > http://www.alberg30.org/mailman/listinfo/public-list
 > To unsubscribe: email to Public-list-request at alberg30.org
 > Include command "unsubscribe <password>" in subject or body.
 > Use command "help" for more options.
 >

  +-------------------------------------------------------------------+
  |  Foul weather?  Deep discounts on Henri Lloyd and 2001 Gill gear. |
  | *** http://www.myaffiliateprogram.com/u/sailnet/t.asp?id=1066 *** |
  +-------------------------------------------------------------------+


_______________________________________________
Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.







_________________________________________________________________
Join the world’s largest e-mail service with MSN Hotmail. 
http://www.hotmail.com

 +-------------------------------------------------------------------+
 |  Foul weather?  Deep discounts on Henri Lloyd and 2001 Gill gear. |
 | *** http://www.myaffiliateprogram.com/u/sailnet/t.asp?id=1066 *** |
 +-------------------------------------------------------------------+


_______________________________________________
Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 1012861372.0


More information about the Public-List mailing list