[Alberg30] instrument panel

[chrishardy]

Hole saw works fine if you use a drill press. I could have cut them out 
on my cnc router as well but the hole saw was quick cheap and good 
enough for the application as most gauges have a lip that covers the 
hole. I also bedded them in 3m 101 as they are exposed to the weather.....


 //===============================================================//
 //       Ocean Navigator magazine, for the serious sailor        //
 // http://www.amazon.com/exec/obidos/ASIN/B000066625/alberg30-20 //
 //===============================================================//
_______________________________________________
Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 1026905706.0