[Alberg30] Mainsail halyard

Dave Terrell DTERRELL at message.nmc.edu
Sat Nov 2 14:25:21 PST 2002


did you use the same sheave or did you make a change?

>>> timmins at optonline.net 11/01/02 07:27PM >>>

Peter,
  When I bought my A30, one of the first things I did was to change from a wire/rope main halyard to an all rope 3/8" halyard. It fit fine and I used it for the six (or so) years I owned her with no problems. The current owner is still using the same halyard and hasn't mentioned any concerns to me.
Regards,
Brian         ex#497
----- Original Message ----- 
From: Peter Amos 
To: public-list at alberg30.org 
Sent: Friday, November 01, 2002 3:55 PM
Subject: [Alberg30] Mainsail halyard


I see from the Maintenance site that the standard sheave can take a 3/8" halyard.Is there space in the housing above the sheave for this size line?If the space is tight could it be increased by careful use of a grinding stone on a Dremmel? Is 3/8" an O.K. size for a mainsail halyard?
Peter Amos  #478
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alberg30.org/pipermail/public-list-alberg30.org/attachments/20021102/0288219d/attachment-0008.htm>


More information about the Public-List mailing list