[Alberg30] Mainsail halyard

[Brian and Elaine Timmins]

Same sheave, Same mounting. Just replaced the line.
Brian
  ----- Original Message ----- 
  From: Dave Terrell 
  To: public-list at alberg30.org 
  Sent: Saturday, November 02, 2002 5:25 PM
  Subject: Re: [Alberg30] Mainsail halyard


  did you use the same sheave or did you make a change?

  >>> timmins at optonline.net 11/01/02 07:27PM >>>

  Peter,
    When I bought my A30, one of the first things I did was to change from a wire/rope main halyard to an all rope 3/8" halyard. It fit fine and I used it for the six (or so) years I owned her with no problems. The current owner is still using the same halyard and hasn't mentioned any concerns to me.
  Regards,
  Brian         ex#497
    ----- Original Message ----- 
    From: Peter Amos 
    To: public-list at alberg30.org 
    Sent: Friday, November 01, 2002 3:55 PM
    Subject: [Alberg30] Mainsail halyard


    I see from the Maintenance site that the standard sheave can take a 3/8" halyard.Is there space in the housing above the sheave for this size line?If the space is tight could it be increased by careful use of a grinding stone on a Dremmel? Is 3/8" an O.K. size for a mainsail halyard?
    Peter Amos  #478
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alberg30.org/pipermail/public-list-alberg30.org/attachments/20021102/ff0aa60f/attachment-0008.htm>