[Alberg30] profurl roller furling

[Brian and Elaine Timmins]

My need is not for an A30 anymore. I'm sailing a Landfall 39 heavy
displacement cutter. It's similar to a Vagabond 39 (also rare). This is for
my forward jib stay which usually has the small yankee on it, but also
carries the large genoa (eventually anyway). That's why the 2100 system.
Brian
----- Original Message -----
From: "John Birch" <Sunstone at cogeco.ca>
To: "Alberg 30 public list" <public-list at alberg30.org>
Sent: Thursday, November 14, 2002 6:41 PM
Subject: Re: [Alberg30] profurl roller furling


> Oh, if you have an A-30 you don't need a 2100 - a Schaffer 1100 would be
> more than adequate.
>
>  Have had the Shaffer 2000 on my A-37 for 5 or 6 years with no problems -
>  extremely robust, good looking. I would recommend it in a heartbeat.
>
>  Cheers,
>
>  John
>
> > ----- Original Message -----
> > From: "Brian and Elaine Timmins" <timmins at optonline.net>
> > To: "Alberg 30 public list" <public-list at alberg30.org>
> > Sent: Thursday, November 14, 2002 5:59 PM
> > Subject: Re: [Alberg30] profurl roller furling
> >
> >
> > >   As a side question re: Profurl, those of you that have them, how do
> you
> > > like them?
> > >   I'm still back and forth between Profurl and Schaffer (NC42 vs 2100
in
> > my
> > > case). I've always considered Profurl the best but the discussions I
had
> > > with various resellers during the boat show have me thinking the
> Schaffer
> > > system might be better in a pure cruising environment. Everyone
stressed
> > how
> > > free spinning the upper swivel is on the Schaffer vs the sealed steel
> > > bearing on the Profurl.
> > >   Anyone care to comment?
> > > Thanks,
> > > Brian      ex#497
> > > ----- Original Message -----
> > > From: "Dave Terrell" <DTERRELL at message.nmc.edu>
> > > To: <public-list at alberg30.org>
> > > Sent: Thursday, November 14, 2002 5:36 PM
> > > Subject: [Alberg30] profurl roller furling
> > >
> > >
> > > > I have a question for those of you who have profurl roller reefing
on
> > > > your boats and did not revise mast head fitting as Stephen did.
> > > >
> > > > They are:
> > > >
> > > > 1. Is the halyard block for the genoa above the wrap stop? and if so
> by
> > > > how much?
> > > >
> > > > 2. How much of the wire portion of the head stay is exposed before
one
> > > > gets to the wrap stop?
> > > >
> > > > 3. Is the shackle on the genoa halyard block a swivel block or a
fixed
> > > > block?
> > > >
> > > > Others seem not have had the problems I had last spring when I
> > > > installed my profurl reefing system, and I am trying to figure out
> where
> > > > I went astray. I hope your answers to these questions can help me.
> > > >
> > > > I am also eager as I think some of you are to see how Stephen solved
> > > > the installation problem.
> > > >
> > > > Thanks as always for the help.
> > > >  +----------------------------------------------+
> > > >  | http://www.alberg30.org/store/Calendars.html |
> > > >  | Have you got your 2003 calendars yet???????? |
> > > >  +----------------------------------------------+
> > > >
> > > > _______________________________________________
> > > > Public-list mailing list -- Public-list at alberg30.org
> > > > http://www.alberg30.org/mailman/listinfo/public-list
> > > > To unsubscribe: email to Public-list-request at alberg30.org
> > > > Include command "unsubscribe <password>" in subject or body.
> > > > Use command "help" for more options.
> > >
> > >  +----------------------------------------------+
> > >  | http://www.alberg30.org/store/Calendars.html |
> > >  | Have you got your 2003 calendars yet???????? |
> > >  +----------------------------------------------+
> > >
> > > _______________________________________________
> > > Public-list mailing list -- Public-list at alberg30.org
> > > http://www.alberg30.org/mailman/listinfo/public-list
> > > To unsubscribe: email to Public-list-request at alberg30.org
> > > Include command "unsubscribe <password>" in subject or body.
> > > Use command "help" for more options.
> >
> >  +----------------------------------------------+
> >  | http://www.alberg30.org/store/Calendars.html |
> >  | Have you got your 2003 calendars yet???????? |
> >  +----------------------------------------------+
> >
> > _______________________________________________
> > Public-list mailing list -- Public-list at alberg30.org
> > http://www.alberg30.org/mailman/listinfo/public-list
> > To unsubscribe: email to Public-list-request at alberg30.org
> > Include command "unsubscribe <password>" in subject or body.
> > Use command "help" for more options.
>
>  +----------------------------------------------+
>  | http://www.alberg30.org/store/Calendars.html |
>  | Have you got your 2003 calendars yet???????? |
>  +----------------------------------------------+
>
> _______________________________________________
> Public-list mailing list -- Public-list at alberg30.org
> http://www.alberg30.org/mailman/listinfo/public-list
> To unsubscribe: email to Public-list-request at alberg30.org
> Include command "unsubscribe <password>" in subject or body.
> Use command "help" for more options.

 +----------------------------------------------+
 | http://www.alberg30.org/store/Calendars.html |
 | Have you got your 2003 calendars yet???????? |
 +----------------------------------------------+

_______________________________________________
Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 1037318849.0