[Alberg30] profurl roller furling

[Dave Terrell]

I am happy as a clam with mine even though I had some installation
challenges. It appears to bullet proof.

>>> timmins at optonline.net 11/14/02 05:59PM >>>
  As a side question re: Profurl, those of you that have them, how do
you
like them?
  I'm still back and forth between Profurl and Schaffer (NC42 vs 2100
in my
case). I've always considered Profurl the best but the discussions I
had
with various resellers during the boat show have me thinking the
Schaffer
system might be better in a pure cruising environment. Everyone
stressed how
free spinning the upper swivel is on the Schaffer vs the sealed steel
bearing on the Profurl.
  Anyone care to comment?
Thanks,
Brian      ex#497
----- Original Message -----
From: "Dave Terrell" <DTERRELL at message.nmc.edu>
To: <public-list at alberg30.org>
Sent: Thursday, November 14, 2002 5:36 PM
Subject: [Alberg30] profurl roller furling


> I have a question for those of you who have profurl roller reefing
on
> your boats and did not revise mast head fitting as Stephen did.
>
> They are:
>
> 1. Is the halyard block for the genoa above the wrap stop? and if so
by
> how much?
>
> 2. How much of the wire portion of the head stay is exposed before
one
> gets to the wrap stop?
>
> 3. Is the shackle on the genoa halyard block a swivel block or a
fixed
> block?
>
> Others seem not have had the problems I had last spring when I
> installed my profurl reefing system, and I am trying to figure out
where
> I went astray. I hope your answers to these questions can help me.
>
> I am also eager as I think some of you are to see how Stephen solved
> the installation problem.
>
> Thanks as always for the help.
>  +----------------------------------------------+
>  | http://www.alberg30.org/store/Calendars.html |
>  | Have you got your 2003 calendars yet???????? |
>  +----------------------------------------------+
>
> _______________________________________________
> Public-list mailing list -- Public-list at alberg30.org 
> http://www.alberg30.org/mailman/listinfo/public-list 
> To unsubscribe: email to Public-list-request at alberg30.org 
> Include command "unsubscribe <password>" in subject or body.
> Use command "help" for more options.

 +----------------------------------------------+
 | http://www.alberg30.org/store/Calendars.html |
 | Have you got your 2003 calendars yet???????? |
 +----------------------------------------------+

_______________________________________________
Public-list mailing list -- Public-list at alberg30.org 
http://www.alberg30.org/mailman/listinfo/public-list 
To unsubscribe: email to Public-list-request at alberg30.org 
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.
 +----------------------------------------------+
 | http://www.alberg30.org/store/Calendars.html |
 | Have you got your 2003 calendars yet???????? |
 +----------------------------------------------+

_______________________________________________
Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 1037395401.0