[Alberg30] water tank leaks

[Brian and Elaine Timmins]

Jim,
   As best as I can recollect, I used Gluvit, waited for it to cure and then cleaned and polished (no not waxed) the interior. Of course, my problem wasn't pin holes but was small hairline cracks. The cracks got openned up some and filled with epoxy putty before the Gluvit was used to seal the whole inner skin. All of this was on the moulded in tank on an A30 so the rest of the operation involved reinstalling the modified, epoxy coated, aluminum cover and bedding it in 101 to seal it.
Good luck with your leaks,
Brian
  ----- Original Message ----- 
  From: Flyer Boy 
  To: public-list at alberg30.org 
  Sent: Monday, October 21, 2002 1:11 AM
  Subject: [Alberg30] water tank leaks


  This message is for Brian and Elaine Timmins.  I seen your small article of water tank moes on the Internet.  Having some trouble with my water tanks, pin hole leaks on some seams.  Have water tanks out, need some kind of sealer to seal them.  Did you ever find the sealer you used. 

  Need Help!

  Jim Wilson
  flyrboy2002 at yahoo.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alberg30.org/pipermail/public-list-alberg30.org/attachments/20021021/4d9b12c5/attachment-0004.htm>