[Alberg30] Cutless Bearing Removal

[Charles Haggart]

I changed out my cutlass bearing last spring and I used a cold chisel to
very carefully slice the wall of the cutlass bearing thus allowing it to
collapse enough to pound it out. I did this on the bench after I  took
off the stern casing by removing the two lag bolts and then spinning the
casing off the stern tube. Then I backed out the two set screws in the
side of the casing that hold the cutlass bearing in place. Take care
with the cold chisel it is delicate work.

Charles Haggart A30 # 150


 +----------------------------------------------+
 | http://www.alberg30.org/store/Calendars.html |
 | Have you got your 2003 calendars yet???????? |
 +----------------------------------------------+

_______________________________________________
Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 1035736610.0